Technical data

Version 3.0
955-0003_V3.0, REV-A ©2011-2012 RED.COM INC.
31
c. While applying steady pressure to hold the battery module against the adaptor plate, use a T-20
Torx to rotate the lock on the adapter plate clockwise to secure the battery module.
To remove the Quad Battery Module and Adaptor Plate:
1. Power down the camera if necessary.
2. Use a T-20 Torx to rotate the lock on the adapter plate to the Unlock position.
3. Rotate the battery module upwards and down to disengage lip at top of battery module from adaptor
plate.
4. Remove battery module from adapter plate.
5. Use a T-20 to loosen the screws attaching the adaptor plate the camera brain.
6. Remove the adaptor plate from the camera brain.
Rotate Lock Clockwise
Until Red Dot Lines Up
with Lock Icon
Press Battery Module
Flush with Adaptor