Operation Manual

RED DSMC OPERATION GUIDE: EPIC/SCARLET

955-0020_V6.0, REV-G | 58

CAMERA MODE

The Camera Mode allows you to seamlessly toggle between Motion mode, Stills mode, and Playback. To select

a camera mode, select the Camera Mode icon in the Lower Status Bar, swipe up, and select a camera mode.

NOTE: Setting adjustments made in Stills mode do not affect the settings in Motion mode, and vice versa.

NOTE: You can also switch between Stills and Motion mode by using the Motion/Stills switch on the DSMC Side

Handle and REDMOTE.

You can select the following camera modes:

 “Motion Mode” on page 58

 “Stills Mode” on page 58

 “Playback Menu” on page 126

MOTION MODE

Motion mode optimizes your camera settings for capturing motion. This mode defaults the camera to Continuous

Record. Motion mode includes the following features:

 Motion recording modes:

‒ “Continuous Record” on page 99

‒ “Internal Timelapse Timer” on page 99

‒ “Frame Trigger” on page 99

‒ “Speed Ramp Mode” on page 100

‒ “REDCODE Burst” on page 100

 Swipe-Up Shortcuts

‒ Camera Mode

‒ Tools

‒ Media

‒ Power

NOTE: For more information, go to “Swipe-Up Menu” on page 63.

 Default Motion Preset (RED)

NOTE: For more information, go to “Default Key Functions” on page 219.

STILLS MODE

Stills mode optimizes your camera settings for capturing stills. In Stills mode, the camera defaults to 6K 3:2,

REDCODE 3:1, Auto Exposure Single Shot, and Multi-Shot mode. Stills mode includes the following features:

 Stills recording modes:

‒ “Multi-Shot” on page 101

‒ “Motion + Stills” on page 102

 Swipe-Up Shortcuts:

‒ Auto Exposure

‒ Auto Focus

‒ Record Mode

NOTE: For more information, go to “Swipe-Up Menu” on page 63.

 Default Stills Preset (RED)

NOTE: For more information, go to “Preset Default Key Functions” on page 222.