Operation Manual

RED DSMC OPERATION GUIDE: EPIC/SCARLET

DSMC SIDE HANDLE

This section describes the controls and display of the DSMC Side Handle.

# CONTROL/ITEM DESCRIPTION

1 LCD Display Go to “DSMC Side Handle Display” on page 66

2 User Keys (1–4)

User 1-4 keys are used to select a slot on the DSMC Side Handle Display. The

front rotary then adjusts the value of the selected slot.

3 Menu Button Access menus or exit currently selected menu

4 Rocker Switch Open (Up)/Close (Down) Iris

5 User Keys (5–7) 5: Toggle Exposure Mode on/off

6: Key Disabled

7: Eject Media

6 Thumbwheel Lock Install and remove the DSMC Side Handle

7 LCD Backlight Button Toggles LCD backlight illumination

8 Navigation Group Navigate menus and menu items; go to “Navigation Group” on page 64

9 User Keys (A–D) A: Cycle Auto-Focus Mode

B: Auto White Balance

C: Toggle 1:1 Magnify on/off

D: Toggle Exposure Mode on/off

10 Rotary Dial Adjust camera parameter values based on the underlined value on the

DSMC Side Handle LCD Display

11 Focus/Record Button Half-press for auto-focus; full press to Start/Stop Record

12 Stills/Motion Mode Switch Toggles between Stills/Motion Mode, enabled in v6.0 firmware or later

13 Battery Door Release Press to open the battery door

14 PC Sync Port Triggers external flashes or strobes

1. Press User Keys 1 + 4 simultaneously to lock/unlock DSMC Side Handle buttons to prevent inadvertent menu changes.

NOTE: DSMC Side Handle keys are programmable. For more information, go to “Key Mapping” on page 104.

DSMC Side Handle

Controls