Operation Manual

COPYRIGHT © 2012 RED.com, Inc. 955-0002_v3.3, Rev- B
138 138 138 138
Post Record Delay
This is the amount of time the fan will stay in the "record speed" setting before switching
back to "standby speed setting." This feature is helpful when shooting with two cameras.
Without this feature, as one camera comes out of record, the other could pick up the fan
sound as it goes to high speed. Times available are none, 10s, 30s, and 1min. Default is
“None.”
INDICATORS
Beep Speaker
Available options are OFF and RECORD/STOP. When RECORD/STOP is selected, an audible beep will
be heard when record is started and another when record is stopped.
EVF Tally Light
When checked, enables the Record Tally Red LED on the front of the EVF.