Operation Manual

139 139

RECORDING

External Recording Only

This defeats recording onto the Brain's SSD but continues to flag "REC START / STOP" in the HD-SDI

HANC metadata, so an external recorder can be remotely START / STOPPED by the Brain via the REC

key(s)

Enable Look Around

This shows an additional area outside the area that is bing recorded to the SSD / output from the HD-

SDI feed so that you can observe any items that may soon impinge on the record area … for example a

boom mike may be about to drop into the active frame area and the operator can call that out to prevent

the take from being compromised.

Note: Selecting LOOK AROUND may have some effect on max frame rate available at the

selected frame size.

MAINTENANCE

The maintenance menu allows the user to check system status and information, save the camera

diagnostic LOG to attached media, perform a software update, calibrate the sensor, perform a camera

self test, and reset system settings to factory defaults.