Operation Manual

140 140 140 140

SYSTEM INFO

When selected the Viewfinder output(s) will display the camera Model, current firmware Version, installed

and camera P.I.N.

SAVE LOG

Select to write camera’s .LOG file to the REDMAG 1.8” SSD. The .LOG file is a diagnostic tool that can

assist RED with camera troubleshooting. After capture, upload the .LOG file to the RED customer

service team contactable at

www.RED.com/support.

After successfully writing the log file to media, viewfinder output(s) will display LOG SAVE COMPLETED.

REDMOTE will also display this message.

If media is not attached to the camera when attempting to perform a write log request, external monitors

will display NO MEDIA ATTACHED.

NOTE: Log files will be stored as *.txt files in the 1.8” SSD root directory.

SW UPDATE

NOTE: Firmware upgrade currently uses a force upgrade procedure as outlined in APPENDIX A:

UPGRADING CAMERA FIRMWARE.

CALIBRATION

Sensor calibration is a process where the camera generates a calibration map to correct for pixel

defects and offsets based on current system and environmental settings. This allows you to perform a