Operation Manual

214 214 214 214

10. The program will now install. A progress bar is displayed while installing. When complete, select

Close.

11. The REDMOTE Upgrade Utility installation is complete.

Upgrading REDMOTE Firmware

The following information will guide you through proper upgrading of your REDMOTE firmware on

Windows computers using the REDMOTE Upgrade Utility.

1. Connect a USB to mini-USB cable between the computer and the USB connector on the

REDMOTE.

2. Ensure the REDMOTE wakes up and displays the “Total Cameras Found” screen.

NOTE: When properly connected to the PC, the battery charge indicator will be Green and blink.

3. Under Programs, locate REDMOTE_update and open the program.

4. The REDMOTE Upgrade Utility window will open.

5. Select “Connect” to establish communication between the REDMOTE and REDMOTE Update.