Operation Manual

65 65

ADJUST PROJECT SETTINGS

TIME BASE

The project TIME BASE defines the rate at which the footage will be played back. When changing the

project frame-rate, the sensor frame-rate will default to the project rate, but may be over-ridden using the

sensor frame-rate controls.

Multiple projects with differing time bases may be stored on a media cartridge (SSD.)

To adjust the project TIME BASE, press the MENU button on the Side Handle or REDMOTE. Then use the

Scroll Wheel or Direction Keys to navigate to SETTINGS > PROJECT > TIME BASE and press ENTER.

Adjust to the desired value using the Scroll Wheel and press ENTER once more to confirm.

If using a Touch Screen, select SECONDARY MENUS > SETTINGS > PROJECT > TIME BASE. Adjust by

sliding your finger up / down or tapping on the desired value, and then press anywhere else on the touch

screen to confirm.

The following TIME BASES are currently available:

• 23.98 fps

• 24.00 fps

• 25.00 fps

• 29.97 fps

• 47.96 fps

• 48.00 fps

• 50.00 fps

• 59.94 fps