Operation Manual

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 108

MONITOR CONTROL

MONITOR

Configure the settings for each of your monitors.

Mode

Determines what information you want displayed on your monitor. The following modes exist, but the

availability of each mode changes dynamically based on other settings:

Menus: The menus display.

Overlay: The overlay displays (you can select different overlays from the Overlay drop-down menu).

Clean: Only the video displays, you do not see any menus or overlay items.

Mirror: Mirrors another screen at the same resolution. You cannot mirror a screen that is set to Clean.

A maximum of 4 screens can be assigned at a mode other than Clean given time. After assigned 4 screens

to anything other than Clean, your remaining options will only be Clean or Mirror.

Overlay

Select which overlay you want on the monitor. You can choose any of the RED overlays (NONE, OVERVIEW,

STANDARD) or one of your own custom overlays.

Resolution and Frequency

You can change the monitor resolution and frequency. The selection of each setting will be filtered by the

camera to prevent selection of an integer output frequency when a non-integer Project Frame Rate has been

selected, and vice versa. The output frame rate has no restriction.

Each monitoring output can support the following resolutions (the camera will filter the available selections):

720 p

1080 p