Operation Manual

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 201

ADVANCED OPERATION: REDMOTE MENUS

SOFT MENU BUTTONS 1-3

Located below the main LCD display are three Soft Menu Buttons, who access advanced function menus

identified by text in the LCD directly above the corresponding button. These menus control wireless

connection (CONNECT), camera or local menus (REMOTE/LOCAL) and system setup (SETUP).

WIRELESS CONNECT: SOFT MENU BUTTON 1

NOTE: This Button is hidden if REDMOTE is attached to the camera or rear-most camera module.

NOTE: If a REDMOTE has previously been successfully paired with a camera, and the REDMOTE has

scanned the wireless network and found that camera, the following operation can be bypassed as the

REDMOTE will auto scan and connect to that camera each time it is powered ON and undocked.

CONNECT REDMOTE TO A PAIRED CAMERA

NOTE: The following procedure assumes the camera has already been paired and named DEFAULT under

the camera’s SETTINGS > SETUP >REDMOTE and COMMUNICATION menus.

Press CONNECT to initiate a scan by the REDMOTE for available paired cameras in wireless range.

If the REDMOTE fails to find a camera it has been paired with the following screen will be displayed.

Select RESCAN and press the ENTER button in the Navigation Group to force a second scan for paired

cameras in wireless range. A wireless scan typically takes 20-30 seconds.

When REDMOTE finds a camera or cameras it has been paired with in wireless range, the name of the