Operation Manual

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 202

available camera or cameras will be displayed - for example a single camera named DEFAULT.

Select the desired camera to connect to for REDMOTE wireless operation and press the ENTER button in

the Navigation Group. The REDMOTE will connect to the selected camera.

Once connected, the REDMOTE will display the key operating parameters of the selected camera. The

wireless signal strength will be shown in the lower Right corner of the REDMOTE screen.

The camera VIEWFINDER monitor output will confirm REDMOTE is wireless connection by displaying RM

and a signal strength icon in Green on the Lower Status Group.

NOTE: Once this procedure has occurred once, the REDMOTE will automatically search for the camera each

time it is undocked, until the paired camera selection is changed.