Installation manual
14
3-INSTALLATION AND ASSEMBLY
TECHNICAL CHARACTERISTICS EDERA MULTIAIR
Max. overall thermal power: 8 kw / 6880 kcal
Min. overall thermal power: 3,2 kw / 2752 kcal
Eciency at Max 87,8%
Eciency at Min 93,6%
Temperature of exhaust smoke at Max 160 °C
Temperature of exhaust smoke at Min 90 °C
Dust / OGC / Nox (13% O2) 28 mg/Nm
3
- 27 mg/Nm
3
-145 mg/Nm
3
CO at 13% O
2
at Min and at Max 0,052 – 0,015%
CO
2
at Min and at Max 6,0% - 9,2%
Recommended draught at Max power 0,10 mbar - 10 Pa
Recommended draught at Min power 0,05 mbar - 5 Pa
Mass of smoke at Min and at Max 4,0 - 7,0 g/sec
Hopper capacity 30 litri
Type of pellet fuel Pellet diameter 6-8 mm and size 5/30 mm
Pellet hourly consumption Min ~ 0,7 kg/h* - Max ~ 1,8 kg/h*
Autonomy Al min ~ 29 h* - Al max ~ 11 h*
Heatable volume m
3
172/40 – 197/35 – 229/30 **
Combustion air inlet External diameter 50 mm
Smoke outlet External diameter 80 mm
Air inlet 80 cm
2
Electrical power consumption Max 320 W - Med. 100 W
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 125 kg
Weight with packaging 135 kg
* These data may vary according to the type of pellets used.
** Heatable volume based on the heat demand 40-35-30 m3 (respectively 40-35-30 Kcal/h per m
3
).
Tested according to EN 14785 in accordance with Directive 89/106/EEC (Construction Products).