User guide

4-INSTALLATION AND ASSEMBLY

The stove body or unit must always be kept in a vertical position when handled and moved by using carts only. Pay particular attention to

the door and its glass, protecting them from mechanical knocks that would compromise their integrity. Always handle the product with

care. If possible, unpack the stove near the chosen place of installation.

The packaging materials are neither toxic nor harmful, and therefore no particular disposal measures are required. Therefore, the end user

is responsible for product storage, disposal or possible recycling in compliance with the relative applicable laws.

Do not store the stove unit or its cladding without their packaging.

Position the stove without its cladding and connect it to the ue pipe. Use the four adjustable feet (J) to get the stove correctly levelled so

that the smoke outlet (S) is lined up with the connecting pipe (H). Once the connection operations are complete, assemble the cladding

(ceramics or steel sides).

If the stove needs to be connected to a discharge pipe which goes through the rear wall (to then connect to the ue), take utmost care

not to force the joint.

If the stove smoke outlet is forced or used improperly to lift it or position it, the operation of the stove can be

damaged irreparably.

1. TURN THE FEET CLOCKWISE TO LOWER THE STOVE

2. TURN THE FEET COUNTERCLOCKWISE TO RAISE THE STOVE