Manual
Table Of Contents
- REDLINK Bridge Operation Guide
- Table of Contents
- Disclaimer
- REDLINK Bridge Overview
- REDLINK Bridge Connectors and LEDs
- Install the REDLINK Bridge
- Connect REDLINK Bridge to an App
- Control Lenses Via REDLINK Bridge
- REDLINK Bridge Maintenance
- Troubleshoot REDLINK Bridge
- Technical Specifications
- REDLINK Bridge Compatibility
COPYRIGHT © 2014 RED.COM, INC
REDLINK BRIDGE OPERATION GUIDE
955-0064, REV-B | 24
REDLINK BRIDgE
SPECIFICATION DESCRIPTION
Wireless Standard
1
802.11/b/g/n
Wireless Range
2
Approximately 50 feet
Frequency 2.4 GHz
Data Rates 1 Mbps to 72 Mbps
Network Modes
3
Ad-Hoc mode
Infrastructure mode
Network Security WEP
Network Channels Channel 1 to Channel 11 (when connecting to a device)
Channel 1 to Channel 42 (when connecting to T.H.C.)
Output Connector 1x 6-pin 0B LEMO auxiliary connector
Dimensions Height (w/ antenna): 5.17" (13.1 cm)
Height (w/o antenna): 4.32" (11 cm)
Width: 2.95" (7.5 cm)
Depth: 1.06" (2.7 cm)
Weight 0.477 lbs (216 g)
Material Aluminum
Construction Machined
Coating Black anodized coating
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature –5°C to 60°C (–20°F to 140°F)
Operating Humidity Range 0% to 85%, non-condensing
Storage Humidity Range 0% to 85%, non-condensing
Typical Operating Power Dissipation 220 mA
Peak Operating Power Dissipation 300 mA
1. The REDLINK Bridge is not a wireless access point.
2. As with all wireless devices, the communication range may be affected by the environment and any radio frequency (RF) interference
that may be present.
3. Ad-Hoc and infrastructure modes cannot be used at the same time.
A
TECHNICAL
SPECIFICATIONS