Manualshelf

Operation Manual

ManualsBrandsRed ManualsDigital CameraWEAPON - 2015
101102103104105106107108109110
COPYRIGHT © 2015 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON
955-0116_V6.1, REV-E | 106
3. Manually set the first focal length you want to calibrate.
4. There are two (2) ways to start the lens calibration process:
‒ When you attach a lens that the camera does not recognize, the “Unsupported Lens Found” dialog box
displays and asks if you want to calibrate the lens. Select Create Custom Lens Config.
‒ Go to Menu > Settings > Maintenance > Calibrate > Lens and select Create....
The lens calibration process for the current focal length starts and a progress bar displays. Once the
calibration process starts, DO NOT touch the lens, as doing so may cause the lens to calibrate incorrectly.
5. Select OK after the calibration file is created.
6. To calibrate the next focal length, follow the instructions below:
A. Go to Menu > Settings > Maintenance > Calibrate > Lens.
B. Select the calibration file name in the Camera list and select Edit....
C. Manually set the next focal length.
D. Select Add Cal @ xx..., where “xx” is the current focal length.
NOTE: If you calibrate a focal length that has already been calibrated, the new files overrides the previ-
ous file.
The lens calibration process for the current focal length starts and a progress bar displays. Once the
calibration process starts, DO NOT touch the lens, since that may cause incorrect calibration.
7. Repeat Step 6 for each focal length of the lens.
The lens calibration file remains on the camera after system restores and firmware upgrades.
VIEW AND MODIFY LENS CALIBRATION INFORMATION
1. Go to Menu > Settings > Maintenance > Calibrate > Lens.
2. Select the calibration file name in the Camera list and select Edit....
The following information displays:
‒ Mount Type
‒ Focal Length
‒ F Stop Range: Overall aperture range of lens.
‒ Lens Status
‒ Calibrated Focal Lengths
3. You can perform any of the following actions:
‒ Add Cal @ xx...: Calibrate the current focal length; “xx” is the current focal length.
‒ Remove Cal: Remove the calibration for the selected focal length.