Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

WEAPON REDVOLT EXPANDER

Designed for advanced configurations, the WEAPON REDVOLT

Expander mounts directly to the BRAIN and

offers an expansive array of I/O connectors and functionality available for the WEAPON system. The WEAPON

REDVOLT Expander features ports for power in (DC IN), Genlock (BNC), Timecode (LEMO), GIG-E, and more.

HDMI and two 3G-SDI (HD-SDI) outputs offer versatility for your video output needs, while an integrated USB

power output is available to support wireless HDMI transmitters.

The WEAPON REDVOLT Expander offers a modular audio system that you can remove and replace with

upcoming audio modules. The default audio module offers two (2) female XLR audio connections. Each XLR

input features a 3-position selector switch to designate the incoming audio signal type: Balanced Line Level,

Balanced Mic Level, and Balanced Mic with +48V phantom power. Additionally, a 3.5mm line-level headphone

jack lets you sample audio during takes and in playback mode.

The WEAPON REDVOLT Expander also provides multiple auxiliary power outputs, enabling the use of peripheral

camera accessories and more:

 A rear-facing 4-Pin 0B LEMO AUX PWR output supports Start/Stop Trigger IN, Tally OUT, and provides

power out up to 1.5 Amps.

 A front-facing 2-Pin 0B LEMO AUX PWR port and front-facing 7-Pin 0B LEMO SERIAL port share a total

output of 3.0 Amps. The SERIAL port is ideal for powering motor drivers.

 A rear-facing Timecode port offers 5V at 1.5 mA for powering external timecode devices.

 A rear-facing USB port offers 5V at 1.5 Amps for powering HDMI transmitters or small mobile devices.

 The two XLR audio ports in the default audio module each offer +48V phantom power.

For hot-swap support when it matters most, the WEAPON REDVOLT Expander also supports a single REDVOLT

battery. Additional WEAPON-compatible battery and power modules can be mounted for your changing power

needs.

The WEAPON REDVOLT Expander also features a selector switch that enables the BRAIN to automatically boot

when power is provided via the DC IN connector on the expander. This feature allows you to use a connected

DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver

locations. This expander is the ideal solution for a variety of production environments, maximizing camera

interface and functionality for the most demanding shoots.

NOTE: Only one (1) expander module can be used at a time.

WEAPON REDVOLT Expander