Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

MONITOR CONFIG (MONITOR CONFIGURATION)

Use the Monitor Config menu to apply a look and a curve to each monitor output.

1. Select the monitor to configure from the drop-down menu at the top of the menu.

2. Select a look from the Look drop-down menu. Looks are set up in the Look Config menu. For more

information, go to “Look Config (Look Configuration)” on page 72.

3. Select a curve from the Curve drop-down menu:

‒ Neutral: The camera does not apply a graded gamma space to the monitor output.

‒ Graded: The camera applies a graded gamma space to the monitor output.

The Video Path displays the video source and graded gamma space applied to the monitor.

NOTE: The Curve drop-down menu is available if the Video Source is set to RLF or ACES. For more

information, go to “Video Source” on page 70.