BCDC Mounting Bracket Suitable For Toyota Landcruiser 70 70 Series (03/2007 - On) BCDCMB-002
THE BCDC MOUNTING BRACKET The REDARC BCDC Mounting Bracket is designed to install your BCDC in the cool airflow at the front of your vehicle, away from high temperature areas for maximum performance. The BCDC Mounting Bracket is constructed from durable stainless steel and has been designed to fit existing mounting points in your vehicle for ease of installation.
KIT CONTENTS Code A B C D E Part Description BCDCMB-002 BCDC Mounting Bracket M6x12 Pan Head Bolt M6 Nylon Locking Nut M5x12 Pan Head Bolt M5 Nylon Locking Nut A B Quantity 1 4 4 4 4 C E COMPLETED INSTALLATION 3
INSTALLATION Step 1 • Remove grille from the vehicle by removing the 3 hex head screws from the top mounting tabs. Press the tabs on the 2 lower inside mount points outwards to release plastic clips. Lift the grille out. Remove the 2 lower plastic clips from the vehicle and refit to the grille. Step 2 • Fit the BCDC unit to the mounting bracket using the M6x12 Pan Head Bolts and M6 Nylon Locking Nuts. Note: Orient the fasteners with the head of the bolts facing toward the inner of the bracket.
INSTALLATION Step 4 • Remove the 2 x M8 hex bolts from the passenger side of the radiator support panel. Loosen the inner M6 Hex bolt from the headlight mounting tab. Removing factory fitted screws may expose bare metal resulting in rust. Retouch any exposed metal with rust inhibitor if it is not an earth connection. Step 5 • Align the BCDC Mounting Bracket with the bolt holes on the radiator support and slide the lower mounting into the loosened M6 bolt.
INSTALLATION Step 7 • Run the BCDC wiring loom behind the bracket assembly and through the blank hole below the two air conditioner lines to gain access to the engine bay. Complete the wiring according to the BCDC instruction manual. Damage to cabling can cause failure of BCDC and vehicle electrical systems. Ensure wiring is clear of sharp edges and moving parts, and have enough slack to allow for flexing. Step 8 • Re-fit the grille to the vehicle by locating the 2 x lower plastic clips.
TWO YEAR PRODUCT WARRANTY Over the last three decades our company has established a reputation as the power conversion specialist. A 100% Australian-owned company, we have met the needs of customers in transport and other industries through exciting, innovative thinking.
Free technical assistance! For product and technical support contact your regional distributor, call our head office between 8:00am to 5:30pm Australian Central Standard Time, Monday to Friday or send an email using the regional specific details outlined below. Australia (and other Global regions) power@redarc.com.au www.redarc.com.au +61 8 8322 4848 New Zealand power@redarcelectronics.co.nz www.redarcelectronics.co.nz +64-9-222-1024 North America power@redarcelectronics.com www.redarcelectronics.
