User Manual

TECH TIP

EPDK Tow-Pro Installation REV1

For older vehicles, not supplied with driver aids e.g. Cruise, Traction or Stability Control, Brake/Throttle Override

For modern vehicles, equipped with driver aids & Advanced Safety Systems e.g. Adaptive Cruise Control, Assisted

Emergency Braking and Autonomous Emergency Braking.

REDARC EPDK for a Tow-Pro Installation

Towbar Module - STOP LAMP

Tow-Pro

Stop Signal

Trailer Stop Lamp

PIN #6

Solder or Crimp

connections required

Installation requiring diode

Towbar Module - STOP LAMP

Tow-Pro

Stop Signal

Trailer Stop Lamp

PIN #6

Installation without diode

PAGE 1
REDARC EPDK for a Tow-Pro Installation Installation without diode Trailer Stop Lamp PIN #6 Tow-Pro Stop Signal 1 6 5 3 2 7 4 Towbar Module - STOP LAMP For older vehicles, not supplied with driver aids e.g. Cruise, Traction or Stability Control, Brake/Throttle Override Installation requiring diode Trailer Stop Lamp PIN #6 Tow-Pro Stop Signal Solder or Crimp connections required 1 6 5 3 2 7 4 Towbar Module - STOP LAMP For modern vehicles, equipped with driver aids & Advanced Safety Systems e.g.