Manual

WARNING & SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - This manual contains IMPORTANT SAFETY INSTRUCTIONS for the G52-EU
Gauge.
DO NOT OPERATE THE GAUGE UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL AND THE GAUGE IS
INSTALLED AS PER THESE INSTALLATION INSTRUCTIONS. NOT SUITABLE FOR MARINE APPLICATIONS.
1. The G52-EU EGT Gauge is designed to provide an accurate indication of vacuum/boost pressure & exhaust
gas temperature. As accurate as the indication might be, these gauges are not designed to be a substitute for
regular maintenance and inspection by a qualified technician.
2. REDARC recommend that the G52-EU EGT Gauge be installed by a qualified technician.
3. Ensure the gauge face is cleaned only using soapy water and a soft cloth.
4. REDARC gauges are not suitable for installation into marine environments.
SPECIFICATIONS
G52-EU
Input Voltage Range 6 - 16V (For 24V systems use GA-2412V)
Nominal Current Draw 30mA
Gauge Dimensions Ø52mm x 42mm (not incl. studs, Bezel Ø56mm)
Gauge Weight 50g
Warranty 2 Years
Sensor Boost EGT Interface
PRODUCT FUNCTION
The G52-EU is designed to measure exhaust gas temperature which is indicated on a 270°
sweep gauge indicating between 0°C - 1000°C.
The G52-EU also features a Pressure (Boost/Vac) meter which is displayed on the digital
readout at the bottom of the gauge and is capable of measuring between -12 and +23PSI.
1
SAL.FOR.Instruction Manual.G52-EU - Version 2
PSI
EGT
X100
BOOST/VAC
0
2
3
4
5
6
7
8
9
10
Exhaust Gas Temp. Gauge
270° Sweep
0°C - +1,000°C
Pressure Gauge
Digital
-12 PSI - +23 PSI
Ensure that ‘P’-Clip
and star washers are
used during installation.
52mm
4.5mm 20mm
42mm
55mm 44mm
36mm
G52-EU