G52-PWT G52-PWT Oil Pressure & Water Temp.
WARNING & SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS - This manual contains IMPORTANT SAFETY INSTRUCTIONS for the G52PWT Gauge. DO NOT OPERATE THE GAUGE UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL AND THE MONITOR IS INSTALLED AS PER THESE INSTALLATION INSTRUCTIONS. NOT SUITABLE FOR MARINE APPLICATIONS. 1. The G52-PWT Oil Pressure & Water Temp. Gauge is designed to provide an accurate indication of Oil Pressure and Water (coolant) Temperature with an optional temperature indicator.
INSTALLATION Find a suitable location for mounting the Gauge. REDARC offer a range of mounting solutions - refer to www.redarc.com.au . It is important to ensure that your installation meets any regulations regarding Field of View and Head Impact requirements.
OPERATING INSTRUCTIONS Selecting Gauge ID for multi-gauge systems If your gauge is part of a multi gauge system (i.e. more than one gauge) and you wish to allow programming from a single push button, connect the communication link wires together (see wiring diagram on page 2). The Gauge “Id” of all linked gauges will need to be set to unique numbers. Make sure that each gauge is set to a unique number or letter and that one gauge is set as the master “Id.0”.
FREQUENTLY ASKED QUESTIONS Centre black circle on gauge is flashing intermittently. If the black centre ring is flashing and the gauge sounds an alarm, the gauge may have been programmed to trigger a relay, but a relay is not detected. Check the relay connection or reprogram as required. If no relay output is required refer to setup mode 12 and select ‘nc’.
OPERATING INSTRUCTIONS Setup Modes (Setup mode is indicated by display of the programming symbol 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 40 OIL 120 90 TEMP 0 PSI 0 C 60 20 30 0 C ) ID Select Mode / Beeps: 1 Selections: 0 to 9 & A to F
OPERATING INSTRUCTIONS Setup Modes 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 Optional Temp Display Reading Adjust (Positive) Mode / Beeps: 8 Selections: Increments by 1°C every 15 seconds 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 0 C 80 60 120 90 40 OIL TEMP 0 PSI C 60 20 30 0 Enable/Disable Optional Temp Sensor display Mode / Beeps: 7 Selections:
TWO YEAR PRODUCT WARRANTY Over the last three decades our company has established a reputation as the power conversion specialist. A 100% Australian-owned company, we have met the needs of customers in transport and other industries through exciting, innovative thinking.
