Product Manual

WARNING & SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - This manual contains IMPORTANT SAFETY INSTRUCTIONS for the G52-TTT
Gauge.
DO NOT OPERATE THE GAUGE UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL AND THE GAUGE IS
INSTALLED AS PER THESE INSTALLATION INSTRUCTIONS. NOT SUITABLE FOR MARINE APPLICATIONS.
1. The G52-TTT Dual Temperature Gauge is designed to provide an accurate indication of Oil and/or Water
temperatures with an optional temperature indicator. As accurate as the indication might be, these gauges are
not designed to be a substitute for regular maintenance and inspection by a qualified technician.
2. REDARC recommend that the G52-TTT Dual Temperature Gauge be installed by a qualified technician.
3. Ensure the gauge face is cleaned only using soapy water and a soft cloth.
4. REDARC gauges are not suitable for installation into marine environments.
SPECIFICATIONS
G52-TTT
Input Voltage Range 6 - 16V (For 24V systems use GA-2412V)
Nominal Current Draw 30mA
Gauge Dimensions Ø52mm x 42mm (not incl. studs, Bezel Ø56mm)
Gauge Weight 50g
Warranty 2 Years
Sensor 1 and 2 2 x 1/4 NPT Temp Sensor -20 to 170°C
Sensor 3 (optional) Temperature -40 to +160°C
PRODUCT FUNCTION
The G52-TTT is designed to measure the temperature of up to 3 sensors. The temperatures
of two sensors are indicated on a 120° sweep gauge indicating between 60°C and 150°C.
The G52-TTT also features an optional Temperature display for which a seperate sensor is
required*. The Temperature is displayed on the digital readout at the bottom of the gauge and
is capable of measuring between -40°C & +160°C (depending on sensor chosen).
1
SAL.FOR.Instruction Manual.G52-TTT - Version 2
150150
9090
120120
60 60
TEMP C
0
C
0
Temp Gauge
120° Sweep
60°C - 150°C
Temp Gauge
120° Sweep
60°C - 150°C
Temp Gauge
(optional)
Digital
-40°C - +160°C
*(Either GS-UT-80, GS-UT-120, GS-OWT1-4 or GS-OWT1-8)
Ensure that ‘P’-Clip
and star washers are
used during installation.
52mm
4.5mm 20mm
42mm
55mm 44mm
36mm