Product Manual

OPERATING INSTRUCTIONS
Setup Modes (Setup mode is indicated by display of the programming symbol )
ID Select
Mode / Beeps: 1
Selections: 0 to 9 & A to F (16 selections)
For a single gauge setup do not change this selection as only the default selection
“Id.0” allows programming of modes.
Background Colour
Mode / Beeps: 2
Selections: 13 colours
Press and hold to select the programming button to select the colour that the gauge
backlight will display during normal operation. There are 13 different backlight
colour options.
Alert Colour
Mode / Beeps: 3
Selections: 2 Colours (Amber & Red)
Press and hold the programming button to select the colour that the gauge backlight
will change to when an alert is indicated (such as during an over temperature
warning).
Temperature 1 Warning Level
Mode / Beeps: 4
Selections: 120°C - 170°C
Press and hold the programming button until desired warning temperature is set.
Temperature 2 Warning Level
Mode / Beeps: 5
Selections: 120°C - 170°C
Press and hold the programming button until desired warning temperature is set.
Enable/Disable Optional Temp Sensor display
Mode / Beeps: 6
Selections: Temp or “nc”
Press and hold to toggle between the temperature reading and “nc”. The number
“-40” will be displayed if no probe is connected.
4
150150
9090
120120
60 60
TEMP C
0
C
0
150150
9090
120120
60 60
TEMP C
0
C
0
150150
9090
120120
60 60
TEMP C
0
C
0
150150
9090
120120
60 60
TEMP C
0
C
0
150150
9090
120120
60 60
TEMP C
0
C
0
150150
9090
120120
60 60
TEMP C
0
C
0