Manual

OPERATING INSTRUCTIONS

Setup Modes

(Setup mode is indicated by display of the programming symbol )

ID Select

Mode / Beeps: 1

Selections: 0 to 9 & A to F (16 selections)

For a single gauge setup do not change this selection as only the default selection

‘Id.0’ allows programming of modes.

Background Colour

Mode / Beeps: 2

Selections: 13 colours

Press and hold to select the programming button to select the colour that the gauge

backlight will display during normal operation. There are 13 different colour options.

Alert Colour

Mode / Beeps: 3

Selections: 2 Colours (Amber & Red)

Press and hold the programming button to select the colour that the gauge backlight

will change to when an alert is indicated (such as during a low voltage warning).

NOTE THAT THE ALERT THRESHOLDS CANNOT BE CHANGED ON THE G52-VA AND G52-VVA.

Current Sensor Display

Mode / Beeps: 4

Selections: ‘0.0’ or ‘nc’

CHANGING THIS SETTING FROM ‘NC’ TO 0.0 WILL RESET THE ZERO-OFFSET OF THE CURRENT

METER. ENSURE THAT NO CURRENT IS FLOWING WHILST CHANGING THIS SETTING.

If you have installed the optional current sensor (GS-AMPS) and wish to display

current, set this to ‘0.0’, otherwise set to ‘nc’.

Not Used

Mode / Beeps: 5

Selections: ‘oF’

Not used on this model.

VOL TS