Manual

24
3 INSTALLATION
Ensure that all the DC connections are tight - torque to 11.7-13Nm (9-10 ft-lbs). Loose
connections could result in overheating and can be a potential hazard.
Do not operate the inverter with damaged or substandard wiring. Selecting the wrong
cable or fuse size could result in harm to the installer or user and/or damage to the
inverter or other appliances installed in the system. The installer is responsible for
ensuring that the correct cable and fuse sizes are used when installing this inverter.
Refer to section 2.2.4 for more information.
M8 Screw
Ring Terminal
Cable
Figure 3.3.2 - 700/1000W Models
M8 Nut
Spring Washer
Washer
Ring Terminal
Cable
Plastic Cover
(Red)
Plastic Cover
(Black)
Figure 3.3.3 - 1500W/2000W/3000W Models