Manual

8
1 INTRODUCTION
R-12-2000RS R-24-2000RS
Input
Characteristics
Voltage 12VDC 24VDC
Max. Rated Input Current 238A 119A
Over-Voltage Protection 16.5 ± 0.3VDC 33 ± 0.5VDC
Under-Voltage Protection 10.5 ±0.3VDC 21 ± 0.5VDC
Voltage Range 10.5~16.5VDC 21~33VDC
No Load Current <1.8A @ 12VDC <0.9A @ 24VDC
Power Saving Mode <0.1A @ 12VDC <0.05A @ 24VDC
Output
Characteristics
Continuous Output Power 2000VA (± 3%)
Maximum output Power (1 min) > 2000 VA~ 2300 VA (100%~115%)
Surge Power (1 sec) <3500VA
Frequency 50/60Hz ± 0.5% (Dip Switch Selectable)
Output Voltage
200/220/230/240 VAC ± 3% (Dip Switch
Selectable)
Efficiency Max 88% 89%
Short-Circuit Protection 1 Sec Shutdown
Output Waveform Pure Sine Wave (THD < 5% @ Normal Load)
Signal and
Control
Remote Controller Panel Input REMOTE-RS (optional)
LED Indicator Red / Orange / Green LED
Dry Contact Terminal By a relay
Remote Control Terminal
6-port Green terminal
(for inverter ON/OFF)
Protection
Input Protection Over / Under Voltage
AC Output Protection Short-Circuit, Overload
Others
Over / Under Temperature Protection (by Heat
sink Temperature +80°C /-20°C)
Environment
Operating Temp. -20°C~40°C (Derates to 60°C)
Storage Temp. -30°C~70°C
Storage Temp. & Humidity 10~95% RH
Safety and EMC
Safety Standards Certified EN 60950-1
EMC Standards
Certified EN 55022; EN 55024;
EN 61000-3-2, -3-3
EN 61000-4-2, 3, 4, 5, 6, 8, 11
E-mark Certified CISPR 25; ISO 7637-2
Weight 5.24 KG
Cooling Temperature & Load Controlled cooling Fan