Manual

1 CONNECTIONS
1.1 Component locator diagram
1.2 Connections
Connector series: AMPSEAL 8-pin
Description Part Number Quantity
ROS Connector Plug 776286-1 1
Crimp Terminal 770854-3 5
Heat Shrink Boot 202K132-100-0 1
Note: These are included in the packaging with the REDARC ROS.
Wiring: REDARC recommend the use of 16 - 20 AWG wire. Note, for Lucas/Big Red refer
*Note1 in wiring diagram section
On-board
LED indicator
ROS Housing
Security Screw
Mounting Bracket
ROS Electrical
Connector Socket
Retained Test Pin
(Slide out to enable
rotation test of ROS)
3
Figure 1.1.1 - Component Locator
Boot
Connector
Terminals
Figure 1.2.1 - Connector Component Locator