User Manual

Suitable for: MITSUBISHI PAJERO

FI12045

Issue: 2 Date: 24/05/2018

Kit Part No: TPWKIT-009

Step 20

Step 19

Step 21

• Underneath the glove box , remove the light

connector clip (1).

• Disconnect the light connector (2).

• Disconnect the 12v connector (3).

cavity trim

1 2

• Remove the driver dash side trim (1).

• Remove the upper trim panel (2).

• Remove the upper trim panel (1).

• Remove the driver’s side switch panel trim (2).

• Cut out and adhere the Switch Drilling Template (page ) (3)

to the underside of the Switch panel trim (2) as shown.

• Using a Ø2mm drill bit, drill out the pilot holes in the locations

specified on the Template (3).

• Drill out the top hole to Ø4mm and the center hole to Ø25mm.

Page 11 of