User Manual

Suitable for: MITSUBISHI PAJERO
FI12045
Issue: 2 Date: 24/05/2018
© 2018
Kit Part No: TPWKIT-009
Step 23
Step 22
Step 24
3
5
4
2
1
• Secure the Brake Controller ECU (1) onto the Brake Controller
Bracket (2) using supplied M4 Screws (3) M4 Spring Washer (4) and
M4 Flat Washers (5).
Page 12 of
• Connect the 4-Way connector (1) from the kick panel harness to
the Brake Controller ECU (2).
• Connect the Cat-5 Cable (3), supplied in the wiring kit, to the
Brake Controller ECU (2).
2
1
3
• Inside the glove box compartment, secure the Brake Controller
bracket assembly (1) to the vehicle using the vehicle fasteners (2).
• Cable Tie (3) the to the bracket.
•
kick panel harness
Secure the ground ring terminal (4) from the kick panel harness to
the vehicle earth point using the existing fastener.
4
1
2
2
3
Important
Ensure harness is routed away from mechanically moving
parts.
17