User Manual

Safety Notes
General Notes
A
Engine Bay Harness x1
D
B C
3-Way Female
Connector x1
G
H
I
Kick Panel Harness x1
Interface Harness x1
Plug Seal x3
M4X12mm Pan Head Bolt
x4
J
M4 Spring Washer x4
M4 Flat Washer x4
M
Bracket x1
N
F
E
4-Way Female
Connector x1
P
1.5m cat-5 Cable x1
K
200mm Cable Ties x15
L
Universal Fascia x1
O
100x40x3mm
Foam Tape x1
R
Switch Drilling Template
(page 17) x1
Q
60x30x3mm
Foam Tape x1
120X40X3mm
Foam Tape x1
4-Way Male
Connector x1
Parts Supplied
S
Fitting Instructions x1
Suitable for: MITSUBISHI PAJERO
FI12045
Issue: 2 Date: 24/05/2018
© 2018
Kit Part No: TPWKIT-009
•
•
•
•
•
•
Read through the fitting instructions before installation of the accessory. Install the accessory following the fitting
instructions. Failure to do so may cause damage to the vehicle or the accessory.
Ensure all recyclables, discarded vehicle accessory components and packaging are recycled following local recycling
regulations.
It is always recommend that this accessory is fitted by a qualified automotive Technician.
Safely store and protect any removed vehicle components.
Ensure all bare metal surfaces are protected using automotive bare metal primer and touch-up paint, or suitable
automotive rust inhibitor.
Remove all metals swarf and dust from all vehicle surface if surfaces is used for accessory installation.
•
•
Check that all work practices comply with safety standards.
Please wear appropriate clothing and use safety equipment.
Page 02 of
17