Product Manual

3 SYSTEM CONFIGURATION

3.5.1 Channel Conﬁ guration Options

The Channel Conﬁ guration pages allow you to

customise the speciﬁ c details of each channel. Each

of the different types of channel, outlined in Section

3.5, will provide slightly different options at this page.

1. Channel Details - Allows labelling of the channel,

enabling of the channel and allows the channel

to be given an Icon. Please ensure that ‘Channel

Enabled’ is selected. Some Icons give the option

of an overlay, which is a one letter descriptor to

differentiate multiple instances of the same type of

channel (i.e. water tanks).

2. Input Logic - Allows deﬁ nition of the Turn ON

criteria for a Digital Input channel.

3. Analog Alarms - Provides the option of Under

or Over Alarms to trigger based on the

Input Measurement. These may be Voltage,

Temperature or Water Tank Level.

4. Tank Settings - Allows deﬁ nition of the Water Tank

Level sensing device including the type of probe

used and the water type stored in the tank (i.e.

Clean, Black, Brown etc.)

5. Inverter Settings - Allows enabling of Inverter

communications settings should a REDARC RS series inverter

be connected to the ‘Optional Inverter Connection’ port on the

RedVision Distribution Box.

Tap SAVE to conﬁ rm settings.

3.5.2 Output Channel Logic Conﬁ guration

Output Channels are the channels connected to the 5x 30A, 5x 10A and

the Inverter connected to the RedVision DIstribution Box. Each of these

channels must feature a ‘Logic Conﬁ guration’ which deﬁ nes how the channel behaves.

Master Switched - This switch enables the Master Switch Function for this channel as

described in Section 4.1.3. This switch defaults to ON.