Brochure

Being on the road is great, and now it’s even easier
with the RedVision Total Vehicle Management System
from REDARC.
Introducing a new level of automation in the
caravan, RV and 4WD industries, RedVision is the
ultimate solution in bringing information and control
inoneplace.
Finally, it’s easy to keep an eye on things when
youtravel.
Control
Turn devices on or off such as lights, an inverter,
water-pump and any other loads like TV, electric
steps, fridges and more. This reduces the need for
multiple switch panels, which in turn allows for more
storage space.
Additionally, RedVision is compatible with a
range of REDARC products including Pure Sine
Wave Inverters, In-vehicle Battery Chargers,
Smart Start
®
SBI, and the Manager30 Battery
ManagementSystem.
Monitor
RedVision allows monitoring of six water levels, two
temperature levels like ambient temperature or your
fridge, and will monitor auxiliary battery usage and
charging information when paired with a Manager30.
This means you can keep an eye on all the
essentials inreal time and keep on top of things
before it’stoolate.
Automation
RedVision can be programmed to control multiple
devices automatically and act as a master switch.
Simply hit one button and turn everything off and just
leave the fridge running. Or when the vehicle ignition
is turned on, everything turns off, but the steps can
still be retracted.
All in one place
The display and app each incorporate modern, user
friendly interfaces and easy to navigate systems,
both of which encompass REDARC’s expertise
in innovation, continual investment into R&D and
dedication to manufacturing quality products globally.
The display is the main user interface for RedVision.
The robust 4” colour LED display has been built and
tested to withstand Australia’s tough, rugged and
varied environmental conditions.
It features soft key buttons on either side of
the screen which can be programmed for
multipleinputs.
Configure
Take full control of your device inputs,
output channels and control logic
using the new RedVision Configurator
Smartphone App.
RedVision standard installation (12 or 24 volt)
Get the RedVision app
Monitor and control your loads from
your mobile phone using the handy
RedVision app, which is compatible
with most phones and devices running
iOS 11.1, Android 7.0 and Bluetooth
4.0 orlater. Search RedVision in the
app store to download.
RedVision Manager30 Kit
(TVMSKIT05) Combining the
innovative, award-winning
RedVision Total Vehicle
Management System
(TVMS1280) and the iconic
Manager30 Battery Management System. This kit
provides instant feedback on your auxiliary battery
and electricalsystem.
Australia
Phone [phone]
Fax [phone]
International
Phone [phone]
Fax [phone]
REDARC Electronics
ABN 77 136 785 092
23 Brodie Road (North)
Lonsdale, South Australia
Australia 5160
[e-mail]
www.redarc.com.au
Kit product code Contents
TVMSKIT05 TVMS1280 and BMS1230S3
Want to know more?
Scan this QR code with
your smartphone to go to
the Redarc website
Visit redarc.com.au/redvision
for product information.
Visit redarc.com.au/discoverredvision
to see which RV manufacturers are
RedVision equipped.
Specifications
TVMS1280
Maximum charger current 40A
Maximum battery current 80A
Temperature sensors Two
Output circuits (max) 5x 10A + 5x 30A
Distribution box Display
Operating temperature -20°C to +60°C -20°C to +70°C
Storage temperature -40°C to +85°C -40°C to +85°C
Weight 2.0kg 0.3kg
Dimensions 385x138x58mm 178x108x26mm
Warranty Two years
House Battery
Water
Level Sensors
Temperature
Sensors
Distribution Box
Display
To Alternate Trigger Signals
To Ignition
Small Loads Large Loads
BMS1230S3
Terminating Resistor
Inverter
Battery
Sensor
FuseFuse
Details and specifications are subject to change without notice.
© 2020 REDARC Electronics Pty Ltd. All rights reserved.
6482-200326
®