Product Manual

30
3 SYSTEM CONFIGURATION
There are three main Logic Confi guration types that can be used:
1. Always On - This will ensure that the selected channel is Always On.
This could be used for a fridge, for example, so that you don’t accidentally turn it OFF.
NOTE: This setting will still be controlled by the Master Switch if enabled.
2. Input Control - This will ensure that the selected channel is ONLY turned ON or OFF
with a Digital Input (discussed in Section 3.5). An example of this is a door switch
turning on a light.
3. User Control - This allows the selected channel to be turned ON or OFF using the
Soft Keys on the display or via the Buttons on the App.
In User Controlled mode, ON only during button press and/or Input Override can be
selected. The channel will default to have both of these turned OFF.
ON only during button press - Allows the channel to only be active while the button/
Soft Key is depressed. This may be used for raising or lowering steps or an awning.
Input Override - Allows the channel to be locked ON or OFF by a Digital Input as well
as via User Control.
Digital Input Control - In either Input Control or User Control with Input Override mode,
allows defi nition of the channel function in the instance of a Digital Input Trigger.
Override output when - Defi nes if the Output is Triggered when the Input is ON or OFF.
Override output to - Defi nes the state the Output is Triggered to in this instance.
After override output - Defi nes the return state of the Output after the Trigger is no
longer detected.
Tap SAVE to confi rm settings.
From the Channel
Settings Menu:
• Tap the Channel that
you wish to modify