User manual

REDCAT User Manual
REDCAT User Manual | 26
USING THE REDMIKE TO AMPLIFY EXTERNAL AUDIO EQUIPMENT
The REDMIKE includes a 3.5mm audio input jack to connect to an audio source like
a laptop or MP3 player. The REDMIKE will transmit the audio signal to be played
through the system.
LT-71
The optional LT-71 can also amplify external
audio. Simply plug the 3.5mm patch cable
from the audio source into the input labeled
“AUX IN” and adjust the volume of the
source to the desired sound level.
Helpful Hint
1. If your system includes two REDMIKEs, use
the student microphone (already set to
Channel B). NOTE: This feature works on
both channels but we recommend using
Channel B so the teacher’s volume on
the CH A does not have to be adjusted.
REMEMBER: It’s easy to determine which
REDMIKE is set to Channel B by speaking
into the mic and watching which set of LED’s
glow on the side of the REDCAT.
2. Plug your laptop,
MP3 player or other
audio source into
the input on the
REDMIKE labeled
“INPUT” using a
3.5mm patch cable.
AUDIO
OUTPUT
AUDIO
INPUT
3. Adjust the volume of the selected
mic channel to achieve desired
loudness.