User manual

13
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troublshooting
5. Warranty, Safety
& Specifications
1B. TO SET-UP MOUNTED ON A WALL CONT’D
4. Place the base/wall bracket against
the wall and use a level to confirm
the positioning is straight.
5. Mark the wall where the retaining
screws will be installed.
6. Attach the bracket to the wall
using the mounting screws and
drywall anchors (if required).
7. Holding the REDCAT firmly by the
bottom quarter, slide the REDCAT
onto the wall bracket as illustrated
below.