User manual

20
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
1. Turn the ALD (Assistive Listening
Device) volume control on the
REDMIKE side panel all way the
down.
2. Determine the size and type of
audio input jack on the device as
many manufacturers’ products
differ in connector size and shape.
The Lightspeed LES-370 Personal
FM System requires a 3.5mm to
3.5mm patch cable (part# CA-
MMC3535, not included).
3. Connect a patch cable from the
ALD’s microphone jack or AUX
input to the 3.5mm audio jack
labeled “ALD OUT” on the side
of the REDCAT.
4. Adjust the volume control on the
ALD’s receiver to maximum output.
NOTE: This is to set the maximum
allowable signal from
the REDCAT.
5. With the REDCAT and ALD turned
on, speak into the REDMIKE and
slowly adjust the ALD
volume control until the
appropriate audio level is
attained in the ALD’s receiver
headphones.
OUTPUT TO ASSISTIVE LISTENING
DEVICE (ALD)