User manual

21
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troublshooting
5. Warranty, Safety
& Specifications
2. Adjust the volume of the selected
mic channel to achieve desired
loudness.
USING THE REDMIKE TO AMPLIFY
EXTERNAL AUDIO EQUIPMENT
The REDMIKE includes a 3.5mm audio input jack to connect to an audio source
like a laptop or MP3 player. The REDMIKE will transmit the audio signal to be
played through the system.
If your system includes two REDMIKEs, we recommend using Channel B (student
mike) to amplify the external audio equipment so the teacher’s volume on the
Channel A (teacher mike) does not have to be adjusted.
To determine which REDMIKE is set to Channel B, you can look at the switch on
the back of the mike or speak into one of the mics and watch which set of LED’s
glow on the front panel of the REDCAT (A Volume or B Volume correspond to
Channels A or B).
1. Plug your external audio
equipment (for example, laptop),
into the input on the REDMIKE
labeled “INPUT” using a 3.5mm
patch cable.
AUDIO
OUTPUT
AUDIO
INPUT