User manual

25
2. Setup & Use
3. Optional
Accessories
1. Overview 4. Troublshooting
5. Warranty, Safety
& Specifications
LT-71: Charging
1. Ensure that the LT-71 is turned OFF.
2. Make sure the cradle charger
is plugged into a wall outlet.
Connect one end of the charging
cable into the jack labeled
CHARGER on the side of the LT-71
and plug the other end into the
charging jack on the rear of the
REDMIKE cradle charger. The
LT-71’s rechargeable batteries are
factory installed. The LED on the
front of the LT-71 will glow RED
when charging.
3. Leave the LT-71 plugged in
overnight (8–10 hrs.) to obtain a
full charge.
NOTE: If the system was purchased
without a REDMIKE or REDMIKE VC,
the LT-71 will utilize the BC-TXLT Wall
Charger for charging. Simply plug the
wall charger into an AC outlet and
plug one of the charging cables into
the jack labeled CHARGER on the
LT-71.