User manual

28
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
1. Ensure that the REDMIKE Share is
turned OFF.
2. Make sure the cradle charger
is plugged into a wall outlet.
Connect one end of the charging
cable into the jack labeled
CHARGER on the bottom of the
REDMIKE Share.
3. Plug the other end into the
charging jack on the rear of the
cradle charger.
4. The LED on the microphone will
glow RED to indicate charging.
5. Leave the REDMIKE Share
plugged in overnight (8-10 hours)
to obtain a full charge.
REDMIKE Share: Charging
NOTE: If the system was purchased
without a REDMIKE or REDMIKE VC,
the REDMIKE Share will utilize the
BC-TXLT wall charger. Plug the wall
charger into an AC outlet and plug
the other end(s) into the CHARGER
jack on the REDMIKE Share.