User manual

29
2. Setup & Use
3. Optional
Accessories
1. Overview 4. Troublshooting
5. Warranty, Safety
& Specifications
REDMIKE Share: Initial Set-up
1. Ensure the REDCAT is ON. The red
LED on the power button will glow.
2. Turn on the REDMIKE Share
by sliding the switch to the top
position.
3. Grip the barrel in the center
section. Avoid covering the
infrared emitters just below the
microphone grille. This could
interrupt signal transmission.
4. While speaking in a normal voice,
increase the CH. B VOLUME on
the REDCAT level until your voice
is barely audible.
REMEMBER: This equipment is
designed to supplement and
distribute the user’s voice so they
are able to speak in a conversational
tone. Having the volume set too high
will result in feedback and listener
fatigue.