Use and Care Manual

LATAPOXY® 300LATAPOXY® 300
Latapoxy 300
Epoxy Adhesive
Mixing:
Pour LATAPOXY 300 Epoxy Adhesive Part A and Part B into a clean
mixing pail and mix thoroughly. Add LATAPOXY 300 Part C Filler
Powder and mix to a smooth, trowelable consistency. Mortar is
ready for use immediately after mixing.
Packaging:
LATAPOXY 300 Epoxy Adhesive is a factory proportioned kit with
Resin, hardener and filler powder.
Unit Size:
#1 Unit
Weight: 12.6 lb. (5.7 kg) volume: 0.9 gals. (3.4 l)
Approximate Coverage:
#1 Unit
With 1/8" x 1/8" (3 x 3 mm) square notch trowel
• 45–55 sq. ft./4.2–5.1 m2
With 1/4" x 1/4" (6 x 6 mm) square notch trowel
• 15–18 sq. ft./1.4–1.7 m2
Working Properties (70°F [21°C])
• Pot Life 45 minutes
• Time to Grout 12 hours
• Time to Light Traffic 12 hours
• Time to Heavy Traffic 24 hours
• Minimum Application Layer 1/8 in (3 mm)
• Maximum Application Layer 3/8 in (9 mm)
• Wet Density 99 lbs/ft3 (1590 kg/m3)