Arch Instructions

ManualsBrandsRedi Shade ManualsWindow ShadesOriginal Arch Light Filtering White Light Filtering Cordless Pleated Arch Shade (Actual: 72-in x 36-in)

Our trimming scale is designed only for perfect arches.

To determine if your window is a perfect arch, follow these steps:

1. Measure the width (A) and the height (B) to the nearest 1/4” from the

inside of the window casing.

2. If the width (A) is exactly double the height (B) you have a perfect arch

window.

Example: If you have a window with a width of 30” and a height of 15”, it is

a perfect arch. If the height measurement is any larger or smaller than 15” it

is an imperfect arch.

Once you have conrmed you have a perfect arch, use the trimming

scale on the shade to trim your shade. If you do not have a perfect

arch, check the back of this page to see if the Imperfect Arch Guide

will work for you.

Measure

Trim

Install

a. Peel to remove liner.

Using the exact width (A) from the measurement above, position a

straight edge knife blade on the trimming scale at the line matching

your width measurement, then trim your shade.

Note: our patented trimming scale already takes into account size of the shade when

fanned to a full width and the clearance deduction for a proper t inside your window.

Wondering where to place your cut?

With the red instruction text on the left, locate the measurement of

your window base to the right of the text (example: window base is

38”, trim at the 38” mark).

Cleaning & Care

Lightly dust or vacuum with brush attachment. To spot clean the fabric arch lightly blot with mild detergent and warm water.

The shade is not intended for dry cleaning, spot removers, strong detergent or full water immersion.

If you have questions, please visit redishade.com/FAQ or check out our video tutorial at http://bit.ly/InstallOriginalArch.

b. Place shade in included

arch holder.

c. Fan shade open in window.

View the Original Arch Shade trimming and installation video at redishade.com

Customer Support: 1-888-608-6611

Original Arch

Shade

Included: Original Arch Shade with Trimming Scale and Arch Holder

Have an imperfect

arch? Check out the

imperfect arch guide

on the back for tips!

place cut

here

Note: Be sure to install the trimmed section of the shade that has red instructional text

rather than the trimmed excess which can be discarded.

Summary of content (2 pages)

PAGE 1
Original Arch Shade TM View the Original Arch Shade trimming and installation video at redishade.com Customer Support: 1-888-608-6611 Included: Original Arch Shade with Trimming Scale and Arch Holder 1 Measure Our trimming scale is designed only for perfect arches. To determine if your window is a perfect arch, follow these steps: 1. Measure the width (A) and the height (B) to the nearest 1/4” from the inside of the window casing. 2.
PAGE 2
Original Arch Shade TM Imperfect Arch Guide 1 Please note: Our trimming scale is designed for perfect arches only. This method is for modifying Original Arch shades for slightly imperfect arches. If you have a significantly wide, narrow, or eyebrow arch this product and guide may not work for you. If you do have a specialty arch, we would recommend a custom window treatment.