Installation Guide

Thank you for your purchase of EASY LIFT.

What’s Included:

Easy Lift Shade with Trimming Scale | Trimming Guide

Measure your window width in 3 locations. Use the

smallest measurement.

(Please note our patented cutting scale already takes

into account the clearance deduction for inside mount.)

Measure

Trim

Install & Operate

a) Peel to remove liner.

b) Press rmly across width of

shade to install.

c) Pull shade down to lower

and push up to raise.

View the Easy Lift trimming and installation video at www.redishade/easy-lift.com.

Customer Service: 1-888-608-6611

A smooth kitchen knife with a 3.5” inch blade is recommended.

1) Remove bottom rail end caps.

2) Place cutting guide at exact desired width. (No clearance deduction needed; it’s already included).

3) Position the knife blade at an angle on the top of the shade at your exact measurement.

a) Press rmly cutting through rails and fabric with a rocking motion and constant pressure.

b) Trim each side of the shade to the same exact window measurement.

4) Replace end caps on bottom rail.