How to Guide

Copyright © 2014. Tile Redi Sales, LLC. All Rights Reserved 1 Rev. 20140314
Tile Redi® Installation & Tiling Guide
Redi Trench® Solid Drain Grate Assembly
I. COMPONENTS: (See Fig. 1)
1. Solid Drain Grate (x 1)
2. Rubber Bumpers (x 4)
3. Drain Strainer (x 1)
4. Trench Recess
5. Vertical Drain Spacers: 2mm (x 2), 4mm (x
2), 6mm (x 2)
II. HOW TO TILE THE SHOWER PAN FLOOR
EDGES AROUND THE TRENCH RECESS: (See
Fig. 2)
1. Insert the Solid Drain Grate into the Trench
Recess.
2. Dry fit the tiles to the shower pan floor.
3. Note Tiling Tip: Before setting tile on the
shower pan floor you must comply with
the following: tile up to the edges of the
recessed trench (A and B) so that the
shower pan floor is not visible, while at the
same time insuring (i) none of the shower
pan floor tiles extend beyond the shower
pan floor into the space above the
recessed trench, (ii) proper drainage is
achieved by having none of the tiles
encroach into the drainage space between
the tiled shower pan floor and the Solid
Drain Grate, and (iii) the floor tile will not
prevent the removal of the Solid Drain
Grate from the Trench Recess.
4. Now, remove the Solid Drain Grate from
the Trench Recess and tile the shower pan
floor.

Summary of content (6 pages)