Instructions / Assembly

ManualsBrandsRedi Trench ManualsBath34 in. x 48 in. Single Threshold Shower Base with Back Drain in Gray and Tileable Trench Grate

Tile Redi® Installation & Tiling Guide

Redi Trench® Tileable Grate Assembly

I. COMPONENTS: (See Fig. 1)

1. Tileable Drain Grate (x 1)

2. Rubber Bumpers (x 4)

3. Drain Strainer (x 1)

4. Trench Recess

II. HOW TO TILE THE TILEABLE GRATE AND THE

SHOWER PAN FLOOR EDGES AROUND THE

TRENCH RECESS: (See Fig. 2)

1. Insert the Tileable Drain Grate into the Trench

Recess.

2. Dry fit the tiles to the shower pan floor and

the Tileable Drain Grate.

3. Note Tiling Tip: Before setting tile on the

shower pan floor and the tileable grate you

must comply with the following: tile up to the

edges of the recessed trench (A and B) and the

edges of the grate (C and D) so that neither

the shower pan floor nor the Tileable Drain

Grate is visible, while at the same time

insuring (i) none of the Tileable Drain Grate

tiles extend beyond the edges of the grate, (ii)

none of the shower pan floor tiles extend

beyond the shower pan floor into the space

above the recessed trench, (iii) proper

drainage is achieved by having none of the

tiles encroach into the drainage space

between the tiled shower pan floor and the

Tileable Drain Grate, and (iv) neither the floor

tile or the grate tile will prevent the removal

of the tiled grate from the Trench Recess.

4. Now, remove the Tileable Drain Grate from

the Trench Recess and tile the shower pan

floor. Then insert the Tileable Drain Grate into

the Trench Recess and tile it, lining up any

grout lines on the tiled grate with the grout

lines on the surrounding shower pan floor tile.

Summary of content (6 pages)

PAGE 1
Tile Redi® Installation & Tiling Guide Redi Trench® Tileable Grate Assembly I. COMPONENTS: (See Fig. 1) 1. Tileable Drain Grate (x 1) 2. Rubber Bumpers (x 4) 3. Drain Strainer (x 1) 4. Trench Recess II. HOW TO TILE THE TILEABLE GRATE AND THE SHOWER PAN FLOOR EDGES AROUND THE TRENCH RECESS: (See Fig. 2) 1. Insert the Tileable Drain Grate into the Trench Recess. 2. Dry fit the tiles to the shower pan floor and the Tileable Drain Grate. 3.
PAGE 2
III. HOW TO INSERT THE TILED DRAIN GRATE INTO THE TILED SHOWER PAN FLOOR: (See Figs. 1 & 3) 1. Insert the Rubber Bumpers into the Tileable Drain Grate side holes by inserting them into the holes until they are locked in place (Fig. 1). 2. Slide the tiled drain grate into the shower pan Trench Recess, first by compressing the side of the grate with the Rubber Bumpers against the wall of the shower pan Trench Recess (Fig. 3). 3.
PAGE 3
Tile Redi® Instrucciones de Instalacion y Azulejado Conjunto de Rejilla Redi Trench® Tileable Drain Grate I. COMPONENTES: (Consulte la Fig. 1) 1. Rejilla Tileable Drain Grate (x 1) 2. Recubrimiento de Goma (x 4) 3. Canaleta de Drenaje (x 1) 4. Hueco del Desagüe II. CÓMO AZULEJAR LA REJILLA TILEABLE DRAIN GRATE Y LOS BORDES DEL PISO DE LA BANDEJA PARA DUCHA ALREDEDOR DEL HUECO DEL DESAGÜE: (Consulte la Fig. 2) 1. Coloque la rejilla Tileable Drain Grate en el Hueco del Desagüe. 2.
PAGE 4
III. CÓMO COLOCAR LA REJILLA AZULEJADA EN LA BANDEJA PARA DUCHA AZULEJADA: (Consulte las Figs. 1 y 3) 1. Coloque el Recubrimiento de Goma dentro de los orificios laterales de la rejilla Tileable Drain Grate, colocándoles en los orificios hasta que queden firmes en su lugar (Fig. 1). 2.
PAGE 5
Tile Redi® Instructions de Carrelage et d’Installation L’Assemblage de Grille Pouvant Être Couverte de Carreaux de Redi Trench® I. COMPOSANTS: (Voir la Fig. 1) 1. Grille du Drain Pouvant Être Couverte de Carreaux (x 1) 2. Butoirs en Caoutchouc (x 4) 3. Pommelle de Drain (x 1) 4. Rainure-Guide de Tranchée II. COMMENT COUVRIR DE CARREAUX LA GRILLE POUVANT ÊTRE COUVERTE DE CARREAUX ET LES BORDS DU PLANCHER DU RECEVEUR DE DOUCHE AUTOUR DE LA RAINURE-GUIDE DE TRANCHÉE: (Voir la Fig. 2) 1.
PAGE 6
III. COMMENT INSÉRER LA GRILLE COUVERTE DE CARREAUX DANS LE RECEVEUR DE DOUCHE COUVERT DE CARREAUX: (Voir les Figs. 1 & 3) 1. Insérez les Butoirs en Caoutchouc dans le trous latéraux de la Grille du Drain Pouvant Être Couverte de Carreaux en les insérant dans les trous jusqu’à ce qu’ils se fixent en place (Fig. 1). 2.