How to Guide

6
C. Install the side channels in the same manner making sure they are
plumb before attaching with screws.
3. install the tOP Channel
A. Placing the half channel in the top of the opening making sure it is
aligned with the side channels.
Note: Cutting the top channel in half will allow the top row of blocks to be
installed. If panel is only one or two blocks wide, side channel will also
need to be cut in half.
D. Cut the top channel in half lengthwise with a utility knife. Score
the center groove with the knife and break the channel in half.
2D
3B
B. Attach the channel to the opening by inserting
#
6 x 1” flat head
galvanized screws through the pre-drilled holes in the channel.
Insert a screw at each end of the channel.