How-To Guide

The dissociation of the striking zones is mainly based on the angles that your wrists create
when you configure or play. We recommend that you define separate play areas that require
different angles of hitting: either vertically and/or horizontally.
Note:  With two equivalent wrist angles for two elements, the system will not be able to
differentiate between them.
2.2 Charging the sensors
The sensors are delivered pre-charged. As soon as the red LED starts flashing (see 2.3) we
recommend that you charge the sensor(s) involved.
To do this, simply use the supplied Micro USB cable, connect it to the sensor and the USB
end to your computer or approved smartphone charger socket.
A 3-hour cycle is recommended for a full charge. The LED will turn green once the sensor is
charged.
A full charge provides about 15 hours of play time.
2.3 The different colors of the LED
● A short green LED indicates that the sensor is on.
● A blue blinking LED indicates that the sensor is on and ready to be paired.
● A flashing red LED indicates that the battery is almost empty and needs to be
recharged (via the cable provided).
● A continuous green LED indicates that the sensor is paired.
The sensor will go into standby mode if it is not quickly paired (after 10sec), the LED will be
off. Turn the sensor back on to wake up from standby mode.
3 - Configure your drum kit
3.1 - Pairing of sensors
● Go to the "configure" screen, accessible by touching the configure icon.
● Press the button of the first sensor
● In the right column the sensor appears under the name "Senstroke".
● Click on the sensor in the list
● The sensor LED turns green and the role of the sensor will be indicated on the
display.
● Repeat the operation for the other sensors.
The sensors are paired in the following order: left hand, right hand, right foot, right foot and
left foot.
Note :  if the sensors do not appear in the list, make sure they are on (blue LED blinking),
and/or that the Senstroke smartphone application has the necessary rights (Bluetooth
enabled and GPS location enabled for Android)
3.2 - Calibration