User's Manual

User
AN-100U/UX Base Station
Manual
70-00058-01-04 Proprietary Redline Communications © 2010 Page 34 of 136 April 19, 2010
IF Port
The modem has a female N-type port for connection to the terminal using a coaxial
cable. Through this port and cable, the modem:
- Sends/receives IF modulated data to/from the terminal.
- Transmits status information to the terminal.
- Receives control information from the terminal.
- Receives DC power from the terminal.
RF Port
The modem RF port (female N-type connector) is used for sending/receiving the RF
signal to/from the antenna. A short coaxial cable is provided to connect the modem to
the antenna.
3.2.2 Antenna
The antenna RF port (female N-type connector) is for sending/receiving the RF signal
to/from the modem. A short coaxial cable is provided to connect the antenna to the
modem.
3.2.3 Mounting Brackets
AN-100U
A vertical-mount bracket is provided for mounting the AN-100U TB radio and flat panel
type antennas. The mounting bracket can accommodate 4.45 - 11.45 cm (1 ¾ - 4 ½")
OD masts found on many commercial tower installations. Separate mounting brackets
are provided for parabolic antennas.
AN-100UX
The AN-100UX HTB antenna has an integrated mounting bracket that can
accommodate 4.45 - 11.45 cm (1 ¾ - 4 ½") OD masts found on many commercial tower
installations. A separate mounting bracket is provided for mounting the antenna.