User's Manual

User

AN-100U/UX Base Station

Manual

SS MAC: MAC address of the subscriber associated with this service flow.

SS Name: User-assigned name for the subscriber associated with this service flow.

Direction: Indicates the direction assigned to the service flow.

Downlink: The direction of data traffic is towards the subscriber.

Uplink: The direction of data traffic is from the subscriber.

SC Name: Name of the service class definition associated with this service flow (hover

mouse pointer over name to display service class index number).

Sf State: Current status of the service flow.

Authorized: Service flow configuration has been saved but is not active.

Admitted: Service flow is being edited or SC is setting up the service flow.

Active: Service flow is currently active.

Rejected: Base Station was not able to setup the service flow.

Provisioned Time: Time stamp of when an action was last performed on the service

flow. This time stamp is displayed in hours, minutes, and seconds (hh:mm:ss) relative to

when the base station was rebooted. If required, the absolute time and day of an event

can be determined using the Time Since System Restart on the General Information

page:

Current Time - (Time Since System Restart - Provisioned Time)

Note: A value of '00:00:00' indicates that the service flow was created before the base

station was rebooted, and the service flow has not been activated.

Cs Specification: Convergence sublayer encapsulation type associated with this

service flow. Refer to section 4.3.4: Classifiers on page 57 for supported classification

types.

Enable/Disable: Displays the current state of the service flow:

Enabled: Service flow is provisioned by the base station.

Disabled: Service flow will not be provisioned by the base station.