User's Manual

User
AN-100U/UX Base Station
Manual
70-00058-01-04 Proprietary Redline Communications © 2010 Page 95 of 136 April 19, 2010
5.2.8 set
The set command is used to control selected fields.
Table 42: CLI - Set Command
Command
Parameter/Description
ipAddress
See the ipAddress command.
privacy
Change privacy related settings on SC.
TrustAll: 0 -- no Privacy (authentication) is required for each
subscriber where privacySS=1.
1 -- yes Privacy is disabled.
UseTestTimers: 0 -- Use normal default timer settings
1-- Use factory test timer settings.
sysContact
Change the system administrator contact information (255 chars max).
<val_sysLocation> Enter contact string for this device.
sysLocation
Change the system administrator contact information (255 chars max).
<val_sysLocation>: Enter location string for this device (255 chars max.).
sysName
Change the system name (255 chars max).
<val_sysname>: Enter the system name for this device.
variable
Define or delete a variable. If value part is absent, the variable is deleted.
NameValue The variable name and value pair (i.e. nn=x).
5.2.9 show
The show command is used to display operating information about the base station.
Table 43: CLI - Show Command
Command
Parameter/Description
eventLog
Display system logging events. For example:
Time:.........................Tue May 23 14:17:39
Txt:..........................Radio Type 1: TB3435F7
Time:.........................Tue May 23 14:17:36
Txt:..........................RedMax AN-100U Ver. 1.0.58 started.
ifCounters
Display counter statistics of device interfaces. For example:
Structure --- <<Interface statistics>>
64 bits Ingress Counters 64 bits Egress Counters
Octets:........................0
Octets:........................0
UcastPkts:...............1876059
UcastPkts:................881643
MulticastPkts:.................0
MulticastPkts:.................0
BroadcastPkts:.................0
BroadcastPkts:............583368
Others
Name:.....................Signal
InDiscards:....................0
InMulticastPkts:...............0
InErrors:....................350
InBroadcastPkts:...............0
OutDiscards:...................0
OutMulticastPkts:..............0
OutErrors:.....................0
OutBroadcastPkts:.........583368
ifStatus
Display status of device interfaces. For example:
Structure --- <<Interface Status>>
Descr:........... 802.16
Type:............... propBWAp2Mp(184
Mtu:.................. 2048
Speed:.............. 16940000